Deciphering composition and connectivity of a natural product with the assistance of MS and 2D NMR

A complementary application of three analytical techniques, viz. multidimensional nuclear magnetic resonance spectroscopy (NMR), mass spectrometry (MS), and single‐crystal X‐ray diffractometry was required to identify and refine two natural products isolated from Millettia versicolor and solvent of crystallization. The two compounds, namely 3‐(2H‐1,3‐benzodioxol‐5‐yl)‐6‐methoxy‐8,8‐dimethyl‐4H ,8H‐pyrano[2,3‐h ]chromen‐4‐one, or durmillone, (I), and (2E )‐1‐(4‐{[(2E )‐3,7‐dimethylocta‐2,6‐dien‐1‐yl]oxy}‐2‐hydroxyphenyl)‐3‐(4‐hydroxyphenyl)prop‐2‐en‐1‐one, (II), could not be separated by routine column chromatography and cocrystallized in a 2:1 ratio with 0.13 molecules of ethanol solvent. Compound (II) and ethanol could not be initially identified by single‐crystal X‐ray analysis due to complex disorder in the aliphatic chain region of (II). Mass spectrometry ensured that (II) represented only one species disordered over several positions in the solid state, rather than several species cohabitating on the same crystallographic site. The atomic identification and connectivity in (II) were established by several 2D (two‐dimensional) NMR techniques, which in turn relied on a knowledge of its exact mass. The derived connectivity was then used in the single‐crystal analysis to model the disorder of the aliphatic chain in (II) over three positions and allowed identification of a partially occupied ethanol solvent molecule that was disordered over an inversion center. The disordered moieties were refined with restraints and constraints.     

Orthogonal Surface Tags for Whole‐Cell Biocatalysis

We herein describe the engineering of E. coli strains that display orthogonal tags for immobilization on their surface and overexpress a functional heterologous “protein content” in their cytosol at the same time. Using the outer membrane protein Lpp‐ompA, cell‐surface display of the streptavidin‐binding peptide, the SpyTag/SpyCatcher system, or a HaloTag variant allowed us to generate bacterial strains that can selectively bind to solid substrates, as demonstrated with magnetic microbeads. The simultaneous cytosolic expression of functional content was demonstrated for fluorescent proteins or stereoselective ketoreductase enzymes. The latter strains gave high selectivities for specific immobilization onto complementary surfaces and also in the whole‐cell stereospecific transformation of a prochiral C_S‐symmetric nitrodiketone.     

Utilizing Paper-Based Devices for Antimicrobial-Resistant Bacteria Detection

Antimicrobial resistance (AMR), the ability of a bacterial species to resist the action of an antimicrobial drug, has been on the rise due to the widespread use of antimicrobial agents. Per the World Health Organization, AMR has an estimated annual cost of USD 34 billion in the US and is predicted to be the number one cause of death worldwide by 2050. One way AMR bacteria can spread, and by which individuals can contract AMR infections, is through contaminated water. Monitoring AMR bacteria in the environment currently requires that samples be transported to a central laboratory for slow and labor intensive tests. We have developed an inexpensive assay using paper-based analytical devices (PADs) that can test for the presence of β-lactamase-mediated resistance. To demonstrate viability, the PAD was used to detect β-lactam resistance in wastewater and sewage and identified resistance in individual bacterial species isolated from environmental water sources.     

车险费率厘定精算技术的研究与应用评述

精算技术为中国车险市场费率改革提供必要支持,可以确保费率厘定的科学性与合理性。首先,本文系统梳理了车险分类风险费率厘定精算统计模型的发展历程,并回顾参数估计方法。其次,论述了车险个体风险费率厘定的精算模型与方法,并重点评述了信度理论与奖惩系统的研究。进而,归纳出车险费率厘定精算统计模型的研究热点与发展方向。最后,指明现有研究对中国车险费率厘定精算方法的启示,并提出相关建议。     

Modern automated microextraction procedures for bioanalytical,environmental, and food analyses

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.     

Comparison of a single-use pH test strip and a glass electrode for potentiometric titration

The potentiometric titration of a carbonate mixture or an acetate solution is a common experiment in analytical laboratories. Typically, a glass electrode combined with a calomel or Ag/AgCl reference electrode is used to locate the equivalence points in neutralization titrations. The dissociation constants of weak acids and bases can be calculated from the pH at the half-neutralization point. Recently, a new commercial product for measuring pH has been developed. This novel acid–base detection strip is a single-use sensor that requires neither storage in a preservation liquid nor calibration prior to use. This study examined its suitability for the continuous monitoring of pH changes in potentiometric titrations of carbonate mixtures, acetate solutions, or ammonia solutions. There were no significant differences in the concentrations of solutions tested using a glass electrode and a pH test strip. The pK_a, pK_b, and pH values determined using the two systems differed by less than 5%. The results confirmed that the pH strips are suitable for continuously monitoring pH changes during neutralization titrations. However, the strips can only be used once.     

Cloud-Enabled Handheld NIR Spectroscopy: A Transformative Approach for Real-Time Forensic Analysis of Cannabis Specimens

In the past few years, there has been significant interest within the forensic community regarding the deployment of portable solutions that provide real-time results. This article introduces an innovative technology or technology architecture that enables the integration of a handheld device, specifically, Viavi MicroNIR, with a cloud-based system. This cloud system encompasses a server responsible for data processing and a mobile application acting as a user interface. To demonstrate the transformative impact of this technology on field operators, the analysis of cannabis specimens has been utilized. System's capacity to distinguish between CBD-type and THC-type cannabis has been particularly highlighted, along with the remarkable congruence observed between the near-infrared (NIR) spectra and the reference analytical method involving ultra-high-performance liquid chromatography (UHPLC) The article will present the advantages of this application primarily focusing on its potential to alleviate the burden on laboratories by expediting routine illicit drug analysis. Viavi MicroNIR technology provides laboratory personnel with additional time to handle more complex cases, thereby enhancing overall efficiency.     

Method development for quantitative monitoring of monoclonal antibodies in upstream cell-culture process samples with limited sample preparation – An evaluation of various capillary coatings

Monoclonal antibodies (mAbs) have become an important class of biopharmaceuticals used for the treatment of various diseases. Their quantification during the manufacturing process is important. In this work, a capillary zone electrophoresis (CZE) method was developed for the monitoring of the mAb concentration during cell-culture processes. CZE method development rules are outlined, particularly discussing various capillary coatings, such as a neutral covalent polyvinyl alcohol coating, a dynamic successive multiple ionic-polymer coating, and dynamic coatings using background electrolyte additives such as triethanolamine (T-EthA) and triethylamine. The dynamic T-EthA coating resulted in most stable electro-osmotic flows and most efficient peak shapes. The method is validated over the range 0.1–10 mg/ml, with a linear range of 0.08–1.3 mg/ml and an extended range of 1–10 mg/ml by diluting samples in the latter concentration range 10-fold in water. The intraday precision and accuracy were 2%–12% and 88%–107%, respectively, and inter-day precision and accuracy were 4%–9% and 93%–104%, respectively. The precision and accuracy of the lowest concentration level (0.08 mg/ml) were slightly worse and still well in scope for monitoring purposes. The presented method proved applicable for analysing in-process cell-culture samples from different cell-culture processes and is possibly well suited as platform method.     

Trends in biosensing platforms for SARS-CoV-2 detection: A critical appraisal against standard detection tools

In this ongoing theme of coronavirus disease 2019 (COVID-19) pandemic, highly sensitive analytical testing platforms are extremely necessary to detect SARS-CoV-2 RNA and antiviral antibodies. To limit the viral spread, prompt and precise diagnosis is crucial to facilitate treatment and ensure effective isolation. Accurate detection of antibodies (IgG and IgM) is imperative to understand the prevalence of SARS-CoV-2 in public and to inspect the proportion of immune individuals. In this review, we demonstrate and evaluate some tests that have been used commonly to detect SARS-CoV-2. These include nucleic acid and serological tests for the detection of SARS-CoV-2 RNA and specific antibodies in infected people. Moreover, the vitality of biosensing technologies emphasizing on optical and electrochemical biosensors toward the detection of SARS-CoV-2 has also been discussed here. The early diagnosis of COVID-19 based on detection of reactive oxygen species overproduction because of virus-induced dysfunctioning of lung cells has also been highlighted.